Look carefully and you can see how the two bottom panels fit into the sides.

The yellow tape is what I used to create the straight lines for cutting along the curved surface (briefly discussed here).

Now it's time to fiberglass it in place.

Previous Continue

Comments

  1. Kenneth Jenkins Says :
    March 30, 2022 at 12:19pm
    “Are any of the models set up to facilitate A glass panel configuration”
    • Dorian Jepsen Says:
      April 3, 2022 at 10:43am
      “It's an experimental category aircraft so you are free to do as you please.”
  2. Kenneth Jenkins Says :
    March 30, 2022 at 12:08pm
    “Which model is required for use of the flat 6”
    • Dorian Jepsen Says:
      April 3, 2022 at 10:49am
      “If you're referring to the Corvair engine, then it's probably suited for the W8 because I believe it's only 100hp.”
  3. Kenneth Jenkins Says :
    March 30, 2022 at 12:03pm
    “I am considering building A tailwind and was wondering which model offers the best performance”
    • Dorian Jepsen Says:
      April 3, 2022 at 10:58am
      “It's an experimental airplane so you can build it with as little or as much performance as you want.”

Add a comment

Thank you for writing your comment!